We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Belt drum motor pulley conveyor roller
Introduction
EPT roller, important component of belt conveyor, is used to effectively support belt and bulk material of conveyor. EPT roller consists of shell, shaft, bearing, housing, sea EPT and snapring. According to China national standards, diameter are Ф76,Ф89,Ф108,Ф133,Ф159 etc. EPT EPT conveyor roller is of unique structure, reasonable fitting and accurate assembly, resulting in high capacity and long service life.
Features
1.Adopt cold-drawn round steel with higher surface precision as the shaft material.
2.Good coaxiality and cylindricity.
3.Adopt special technology, can reduce the innerstress and welding heat deformation produced during assembling substantially.
4.Rotate resistance is small, weight is stable, service life can be more than 50000 hours
5.Non-contact type labyrinth seals, higher dust-proof and water-proof properties.
6.Roller with good dynamic and static balance performance.
7.Easy to maintain and replace.
8.Smooth surface, prevent damaging of conveyor belt.
Production technology and process
Technical Parameter:
| Diameter | Lenth mm | Pipe Thickness | Shaft Diameter | Bearing Type | Seal Type | Weight(kg) |
| 63.5mm | 200 | 3mm | 15mm | 6203/4C | Labyrinth Type | 1.86 |
| 600 | 3mm | 15mm | 6203/4C | Labyrinth Type | 4.48 | |
| 76mm | 200 | 3mm | 20mm | 6204/4C | Labyrinth Type | 2.54 |
| 250 | 3mm | 20mm | 6204/4C | Labyrinth Type | 2.85 | |
| 600 | 3mm | 20mm | 6204/4C | Labyrinth Type | 5.82 | |
| 750 | 3mm | 20mm | 6204/4C | Labyrinth Type | 7.05 | |
| 89mm | 200 | 3.5mm | 20mm | 6204/C4 | Labyrinth Type | 2.8 |
| 250 | 3.5mm | 20mm | 6204/C4 | Labyrinth Type | 2.99 | |
| 315 | 3.5mm | 20mm | 6204/C4 | Labyrinth Type | 3.59 | |
| 600 | 3.5mm | 20mm | 6204/C4 | Labyrinth Type | 6.49 | |
| 750 | 3.5mm | 20mm | 6204/C4 | Labyrinth Type | 7.88 | |
| 950 | 3.5mm | 20mm | 6204/C4 | Labyrinth Type | 9.73 | |
| 108mm | 250 | 3.5mm | 25mm | 6205/C4 | Labyrinth Type | 4.3 |
| 315 | 3.5mm | 25mm | 6205/C4 | Labyrinth Type | 5.07 | |
| 380 | 3.5mm | 25mm | 6205/C4 | Labyrinth Type | 5.87 | |
| 465 | 3.5mm | 25mm | 6205/C4 | Labyrinth Type | 6.89 | |
| 530 | 3.5mm | 25mm | 6205/C4 | Labyrinth Type | 7.7 | |
| 600 | 3.5mm | 25mm | 6205/C4 | Labyrinth Type | 8.54 | |
| 750 | 3.5mm | 25mm | 6205/C4 | Labyrinth Type | 10.37 | |
| 950 | 3.5mm | 25mm | 6205/C4 | Labyrinth Type | 12.78 | |
| 1150 | 3.5mm | 25mm | 6205/C4 | Labyrinth Type | 15.2 | |
| 1400 | 3.5mm | 25mm | 6205/C4 | Labyrinth Type | 18.11 | |
| 1600 | 3.5mm | 25mm | 6205/C4 | Labyrinth Type | 20.7 | |
| 133mm | 250 | 4mm | 25mm | 6305/C4 | Labyrinth Type | 4.3 |
| 315 | 4mm | 25mm | 6305/C4 | Labyrinth Type | 7.12 | |
| 380 | 4mm | 25mm | 6305/C4 | Labyrinth Type | 8.23 | |
| 465 | 4mm | 25mm | 6305/C4 | Labyrinth Type | 9.62 | |
| 530 | 4mm | 25mm | 6305/C4 | Labyrinth Type | 10.7 | |
| 600 | 4mm | 25mm | 6305/C4 | Labyrinth Type | 11.86 | |
| 700 | 4mm | 25mm | 6305/C4 | Labyrinth Type | 13.53 | |
| 800 | 4mm | 25mm | 6305/C4 | Labyrinth Type | 15.17 | |
| 950 | 4mm | 25mm | 6305/C4 | Labyrinth Type | 17.66 | |
| 1150 | 4mm | 25mm | 6305/C4 | Labyrinth Type | 20.98 | |
| 1400 | 4mm | 25mm | 6305/C4 | Labyrinth Type | 25 | |
| 1600 | 4mm | 25mm | 6305/C4 | Labyrinth Type | 28.48 | |
| 159mm | 315 | 4.5mm | 30mm | 6306/C4 | Labyrinth Type | 9.38 |
| 380 | 4.5mm | 30mm | 6306/C4 | Labyrinth Type | 11.87 | |
| 465 | 4.5mm | 30mm | 6306/C4 | Labyrinth Type | 13.8 | |
| 530 | 4.5mm | 30mm | 6306/C4 | Labyrinth Type | 15.27 | |
| 600 | 4.5mm | 30mm | 6306/C4 | Labyrinth Type | 16.86 | |
| 700 | 4.5mm | 30mm | 6306/C4 | Labyrinth Type | 19.13 | |
| 800 | 4.5mm | 30mm | 6306/C4 | Labyrinth Type | 21.4 | |
| 1150 | 4.5mm | 30mm | 6306/C4 | Labyrinth Type | 29.34 | |
| 1400 | 4.5mm | 30mm | 6306/C4 | Labyrinth Type | 35.02 | |
| 1600 | 4.5mm | 30mm | 6306/C4 | Labyrinth Type | 39.56 |
We mainly provide the following equipments :
| Vibrating Screen | Rotary vibrating screen |
| Ultrasonic vibrating screen | |
| Gyratory screen | |
| Trommel screen | |
| Linear vibrating screen | |
| Circular vibrating screen | |
| Dewatering screen | |
| Vibrating feeder | |
| Belt Conveyor | Belt conveyor |
| Sidewall belt conveyor | |
| Portable belt conveyor | |
| Shuttle conveyor | |
| Tripper | |
| Bucket Elevator | Efficient bucket elevator |
| Belt bucket elevator | |
| Ring chain bucket elevator | |
| Plate chain bucket elevator | |
| Cement bucket elevator | |
| Silo bucket elevator | |
| Screw Conveyor | U-type screw conveyor |
| Cement screw conveyor | |
| Pipe screw conveyor | |
| Scraper Conveyor | Horizontal scraper chain conveyor |
| Incline scraper chain conveyor | |
| Grain scraper chain conveyor |
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
