Materials Dealing with Energy UNIT one
This energy unit is intended for the fork lift business, consisting of remarkably productive gear pump, DC motor, manual increase and lower valve, tank, ect. The up and down motion are controlled from the lever of your manual release valve, that’s outfitted with an electrical switch to activate the motor. The lowing pace is controlled through the strain compensated flow management valve.
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean all the hydraulic elements concerned just before installation of the power unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which ought to also be clean and free of charge of impurities, N46 hydraulic oil is suggested .
four. Oil shifting is needed soon after the original one hundred operation hrs, afterwards after every 3000 hrs.
five. The electrical power unit proven is intended to be mounted horizontally.
Materials Dealing with Power UNIT 2
This power unit functions power up gravity down circuit. Activate the get started solenoid to start the motor to lift the machine. The lowing motion is activated through the solenoid valve together with the lowering speed controlled by the strain compensated movement management valve. Items of this series may be widely utilized in the industry of logistic gadgets for example fork lift, mini lift table, and so forth.
1. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean the many hydraulic elements concerned prior to mounting the electrical power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst,which should also be clean and cost-free of impurities, N46 hydraulic oil is recommended .
4. Oil altering is needed soon after the original one hundred operation hrs,afterwards after every single 3000 hrs.
5. The energy unit need to be mounted horizontally.