We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/
Features:
1. Cylindrical structure of bearing assembly: convenient to adjust the space between impeller and front liner
and can beremoved completely;
2. Interchangeable anti-abrasive wet parts made of high-chrome alloys;
3. Casing halves of ductile iron with external reinforcing ribs provide high operating pressure capabilities
and an extra measure of safety.
4. The discharge branch can be oriented to any eight positions at the interval of 45 degrees;
5. Various drive types: DC(direct connection), V-belt drive, gear box reducer, hydraulic couplings, VFD,
SCR control, etc;
6. The shaft seal uses the packing seal, expeller seal and mechanical seal
Typical Application:
• Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
• Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
• Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
• Lime mud | • Phosphoric acid | • Dredging | • Construction |
• Alumina Industry | • Power Plant | • Potash Fertilizer Plant | • Other industries |
• Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
Model | Max Power (Kw) |
Inlet & Outlet size (inch) | Material for Wear Parts | Flow Rate (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
m³/hr | l/s | |||||||
25HS-B | 15 | 1.5/1 | M | 12.6~28.8 | 3.5~8 | 6~68 | 1200~3800 | 152 |
R | 10.8~25.2 | 3~7 | 7~52 | 1400~3400 | 152 | |||
40HS-B | 15 | 2/1.5 | M | 32.4~72 | 9~20 | 6~58 | 1200~3200 | 184 |
R | 25.2~54 | 7~15 | 5.5~41 | 1000~2600 | 178 | |||
50HS-C | 30 | 3/2 | M | 39.6~86.4 | 11~24 | 12~64 | 1300~2700 | 214 |
R | 36~75.6 | 10~21 | 13~46 | 1300~2300 | 213 | |||
75HS-C | 30 | 4/3 | M | 86.4~198 | 24~55 | 9~52 | 1000~2200 | 245 |
R | 79.2~180 | 22~50 | 5~34.5 | 800~1800 | 245 | |||
100HS-D | 60 | 6/4 | M | 162~360 | 40~100 | 12~56 | 800~1550 | 365 |
R | 144~324 | 40~90 | 12~45 | 800~1350 | 365 | |||
150HS-E | 120 | 8/6 | M | 360~828 | 100~230 | 10~61 | 500~1140 | 510 |
R | 324~720 | 90~200 | 7~49 | 400~1000 | 510 | |||
200MS-E | 120 | 10/8 | M | 666~1440 | 185~400 | 14~60 | 600~1100 | 549 |
200HS-ST | 560 | 10/8 | M | 612~1368 | 170~380 | 11~61 | 400~850 | 686 |
R | 540~1188 | 150~330 | 12~50 | 400~750 | 686 | |||
250HS-ST | 560 | 12/10 | M | 936~1980 | 260~550 | 7~68 | 300~800 | 762 |
R | 720~1620 | 200~450 | 7~45 | 300~650 | 762 | |||
300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | 13~63 | 300~600 | 965 |
R | 1152~2520 | 320~700 | 13~44 | 300~500 | 965 | |||
350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
450HS-TU | 1200 | 20/18 | M | 2520~5400 | 700~1500 | 13~57 | 200~400 | 1370 |
25HHS-C | 30 | 1.5/1 | M | 16.2~34.2 | 4.5~9.5 | 25~92 | 1400~2200 | 330 |
50HHS-D | 60 | 3/2 | M | 68.4~136.8 | 19~38 | 25~87 | 850~1400 | 457 |
75HHS-E | 120 | 4/3 | M | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
100HHS-E | 120 | 6/4 | M | 324~720 | 90~200 | 30~118 | 600~1000 | 711 |
150HHS-S | 560 | 8/6 | M | 468-1008 | 130~280 | 20~94 | 500~1000 | 711 |
For the material of wearing parts,
“M” = metal, ultra chromium alloy; “R” = anti-abrasive rubber
Contact
Welcome to contact us any time for details.
Your inquiry will get our prompt attention and response !
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.
/