Consisting of a pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is made to operate material handling products. The decreasing movement is achived from the solenoid valve together with the decreasing speed controlled by an adjustable needle valve. The left and correct functions are equipped by using a dual pilot operated test valve and cross-over relief valves.
Remark: Please check with our revenue engineer for the different pump displacement, motor energy or tank capacity.
1. This energy unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean the many hydraulic parts concerned prior to installation of the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which ought to also be clean and absolutely free of impurities.N46 hydraulic oil is recommended.
four. This power unit ought to be mounted horizontal.
5. Check the oil degree within the tank soon after the very first start off on the energy unit.
six. Oil changing is required soon after the first a hundred operation hours, afterwards once every single 3000 hrs.