DUMP TRAILER Power UNIT- SINGLE ACTING
This electrical power unit features a electrical power up gravity down circuit. Get started the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve might be offered if expected. Also a strain compen sated movement control could be additional to the circuit to regulate the descent speed on the cylinder.
Remark: Please check with our income engineer to the different pump displacement, motor energy or tank capacity.
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean every one of the hydraulic parts concerned in advance of set up of the electrical power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst,which really should also be clean and no cost of impurities.N46 hydraulic oil is suggested.
four. The power unit really should be mounted horizontally.
5. Check the oil degree in the tank soon after the first operating of your energy unit.
6. Oil shifting is needed after the initial 100 operation hrs, afterwards the moment every 3000 hours.
DUMP TRAILER Power UNIT-DOUBLE ACTING
This electrical power unit features a power up electrical power down circuit with load holding on both A & B ports. A stress compensatred movement handle is usually extra to circuit to control the decent pace with the cylinder.
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all the hydraulic elements concerned in advance of set up of the energy unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which must also be clean and free of charge of impurities. N46 hydraulic oil is advised.
4. The power unit ought to be mounted horizontally.
five. Check the oil level in the tank following the preliminary operating from the electrical power unit.
6. Oil transforming is needed following the preliminary a hundred operation hours, afterwards as soon as every single 3000 hrs.